York Spiral Stair
the York Difference

Getting a quote for a York Spiral Stair is easy. Simply complete the information below. If you submit your request online, we can provide your quote in a few days. If you prefer to send your request through the U.S. Mail, it generally takes seven to ten days to return your quote.

When ordering spiral stairs, it generally takes six to eight weeks to have your staircase ready for delivery. Please call us at 1-800-996-5558 for more details and to place your order.

If you have any questions about requesting a quote, please call 1-800-996-5558 or email us at info@yorkspiralstair.com.

Fields marked with * are required.

Or, request a quote for a Straight Stair

If you prefer, you can download your request form, fill it out, and fax or mail it to us.
    Spiral Stair Quote Request Form (PDF)
    Straight Stair Quote Request Form (PDF)

Your contact information:

Name* *
Street* *
City* * State* * Zip* *
Phone* *
Email* *

Shipping Information:

Same as Contact Info?
Job Site Name
Street
City State Zip
Job Phone
Email

York Spiral Stair Specifications (required):

1. Diameter of stair required: 5’0” 6’0” 6’8-1/2” 8’6” 18’0”
 
2. Finished floor to floor height:
 
3. Species: Red Oak
Cherry		 Mahogany
Walnut		 Ash
Teak		 Maple
Hickory
Poplar
  Note: If you'd like stairs built with a combination of wood species, please call us to discuss.
 
4. Finish: Without Clear Finish
 
5. Direction of turn when descending: Left Right
 
6. Balusters: 7/8” Round 1-1/8” Square (side mounted)
 
7. Baluster spacing: 6” On center
4-3/4” On center
3”, 4-3/4”, 3” On center
 
8. Handrails: 1-1/2” x 3-1/2” (standard)
1-1/2” x 5-1/2” (standard with 18'0" diameter stair)
1-1/2” x 5-1/2” (custom–required for all stairs with square, side mounted balusters)
Single finger groove on 1-1/2” x 5-1/2” (custom)
Double finger groove on 1-1/2” x 5-1/2” (custom)
 
9. Risers: Open risers Partial risers Solid risers

York Upper Floor Components Needed (optional):

1. Unbored handrail: Straight    
Curved     
Not required 		Linear feet required
Linear feet required
 
2. Unbored nosing: Straight     
Curved     
Not required		 Linear feet required
Linear feet required
 
3. Fascia board: Straight     
Curved     
Not required		 Linear feet required
Linear feet required
 
4. Newel post: 3” x 3” x 44”
1-7/8” x 1-7/8” x 44”
Other
Not required		 Amount required
Amount required
Amount required
 
5. Half newel post: 1-1/2” x 3” x 44”
15/16” x 1-7/8” x 44”
Other
Not required		 Amount required
Amount required
Amount required
 
6. Rosette: Oval
Designer       
Not required 		Amount required
Amount required
 
7. Baluster: 7/8” Round
1-1/8” Square       
Not required 		Amount required
Amount required
 
8. Knee wall cap: Straight     
Curved    
Not required 		Linear feet required
Linear feet required
 
9. Steel anchor plates for concrete installation:
    Required Not required
 
10. 1-1/2” header board routed into stringers for balcony installation:
    Required Not required
How would you like to receive your quote: e-mail by mail
How did you hear about us?
Request a Brochure:

Please Note: Your local building code officials may require that your stairs be built with: closer baluster spacing, partial risers, handrails that have finger grooves, and/or a tread width of at least 26". Local code officers often have different interpretations of the national building codes and some municipalities may have their own specific handrail, baluster, and riser code requirements. Often times, the local code requirements for a secondary stair, or a stair that serves an open loft area, will be much less stringent. Please consult with your local building inspector or code officer for information with respect to your local code requirements.